Husqvarna T435 petrol chainsaw (tree surgeons saw) with FREE bowsaw, machete and pruning shears

The new X-Torq® tree care saw. It´s a lightweight powerful chainsaw for tree pruning from the ground or up in a sky lift. The low weight and well-balanced saw body makes it very easy to work with.

The exhaust vents to the front of the machine (no burnt legs). There are double hanging rings at the back of the saw.





Husqvarna policy statement
Husqvarna Outdoor Products is committed to maintaining a premium brand and to ensuring that "Husqvarna" branded products are distributed appropriately to customers. As such, all "Husqvarna" branded products must be fully assembled, pre-delivery inspected and tested prior to being handed over to customers. Any "Husqvarna" branded products that are purchased online must either be collected by the customer from the relevant dealer or be delivered directly to the customer by the relevant dealer. If you have any queries, please contact Husqvarna Outdoor Products on info.husqvarna@husqvarna.co.uk

Like all the tree climbers saws this is a fast, lightweight machine. However, unlike the others this model incorporates X-Torq®, giving this small machine an unusual amount of pulling power (the ability to pull hard, giving the ability to drive a slightly longer bar or to pull well under heavier work conditions.) Although I personally am not qualified to use this saw (tree surgeons saw) many professional tree surgeons handling this machine comment on its 'balance' compared to others.

Like every Husqvarna in the range, this is an extremely low vibe saw (spring suspension, not rubber).

Fuel pump
Fuel pump designed for easy starting.

Rope attachment
A sturdy point for fastening a rope, making it easy to hoist the saw up into a tree.

Chain tensioning from the side
Allows quick and convenient chain tensioning.

Smart Start®
The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%.

LowVib®
Effective anti-vibration dampeners absorb vibration, sparing the user's arms and hands.

Drop-shaped with smooth sides to prevent sticking in branches.
The well-balanced centre of gravity near the handle makes the saw easy to handle.
Friction inserts in rear handle provide a more agreeable grip.
The filter cover is easy detachable without tools.
Forged three-piece crankshaft for maximum durability for the toughest applications.
Adjustable oil pump makes it easy to set the chain lubriction according to your needs.

Engine specification
Cylinder displacement 35.2 cm³ / 2.15 cu.inch
Power output 1.5 kW / 2 hp(I)
Idling speed 2900 rpm
Maximum power speed 10000 rpm
Cylinder bore 40 mm / 1.57 inch
Cylinder stroke 28 mm / 1.1 inch
Ignition system Ikeda Denso
Ignition module air gap 0.3 mm / 0.01 "
Spark plug NGK BPMR 7A/ Champion RCJ 7Y
Electrode gap 0.5 mm / 0.02 "
Carburettor model name Walbro, WT 804
Fuel tank volume 0.26 lit / 0.55 US pint
Oil tank volume 0.17 lit / 0.36 US pint
Oil pump type Automatic
Oil pump capacity 3-9 ml/min
Cutting equipment
Chain pitch 3/8" LP
Recommended bar length, min-max 30-35 cm / 12"-14"
Chain speed at max power 19.1 m/s / 62.66 fts
Emission, vibration & noise data
Equivalent vibration level (ahv , eq) front / rear handle 4.1/3.9 m/s²
Sound pressure level at operators ear 103 dB(A)
Guaranteed sound power level, LWA 114 dB(A)
Overall dimensions Weight (excl. cutting equipment) 3.4 kg / 7.5 lbs